PIC16F72-I/ML【PDF 6/136 页】IC PIC MCU FLASH 2KX14 28-QFN

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录3871

2页 3页 4页 5页 [6页]7页 8页 9页 10页

103

2535J–AVR–08/10

ATtiny13

17.2 Fuse Bytes

The ATtiny13 has two fuse bytes. Table 17-3 on page 103 and Table 17-4 on page 103 describe

briefly the functionality of all the fuses and how they are mapped into the fuse bytes. Note that

the fuses are read as logical zero, “0”, if they are programmed.

Notes: 1. Enables SPM instruction. See “Self-Programming the Flash” on page 97.

2. DWEN must be unprogrammed when lock Bit security is required. See “Program And Data

Memory Lock Bits” on page 102.

3. See Table 18-5 on page 119 for BODLEVEL fuse decoding.

4. See “Alternate Functions of Port B” on page 54 for description of RSTDISBL and DWEN fuses.

When programming the RSTDISBL fuse, High-voltage Serial programming has to be used to

change fuses to perform further programming.

Notes: 1. The SPIEN fuse is not accessible in SPI Programming mode.

2. Programming this fues will disable the Watchdog Timer Interrupt. See “Watchdog Timer” on

page 37 for details.

3. See “System Clock Prescaler” on page 26 for details.

4. The default value of SUT1..0 results in maximum start-up time for the default clock source.

See Table 18-3 on page 118 for details.

5. The default setting of CKSEL1..0 results in internal RC Oscillator @ 9.6 MHz. See Table 18-3

on page 118 for details.

Table 17-3.

Fuse High Byte

Fuse Bit

Bit No

Description

Default Value

–

1 (unprogrammed)

–

1 (unprogrammed)

–

1 (unprogrammed)

SELFPRGEN(1)

Self Programming Enable

1 (unprogrammed)

DWEN(2)

debugWire Enable

1 (unprogrammed)

BODLEVEL1(3)

Brown-out Detector trigger level

1 (unprogrammed)

BODLEVEL0(3)

Brown-out Detector trigger level

1 (unprogrammed)

RSTDISBL(4)

External Reset disable

1 (unprogrammed)

Table 17-4.

Fuse Low Byte

Fuse Bit

Bit No

Description

Default Value

SPIEN(1)

Enable Serial Programming and Data

Downloading

0 (programmed)

(SPI prog. enabled)

EESAVE

Preserve EEPROM memory through

Chip Erase

1 (unprogrammed)

(memory not preserved)

WDTON(2)

Watchdog Timer always on

1 (unprogrammed)

CKDIV8(3)

Divide clock by 8

0 (programmed)

SUT1(4)

Select start-up time

1 (unprogrammed)

SUT0(4)

Select start-up time

0 (programmed)

CKSEL1(5)

Select Clock source

1 (unprogrammed)

CKSEL0(5)

Select Clock source

0 (programmed)

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式